You are currently viewing Electronics Workshop – June 12th – Soldering

Electronics Workshop – June 12th – Soldering

This workshop will be all about soldering components onto printed circuit boards.

The first part of the workshop will be a demonstration of the fundamental principles. The second part requires members to bring along their soldering iron and solder and use it to solder six components onto a printed circuit board to create a DC / DCC track voltage detector.

If you can’t wait until June, then the following site gives a good guide to the fundamentals.

https://www.makerspaces.com/how-to-solder/

Anyone bringing along plumbers flux will be severely dealt with!

Numbers are limited so members need to book their place with Allan.